Oxford Flow’s ES valve wins prestigious engineering award at Offshore Technology Conference (OTC)

Oxford Flow’s ES valve wins prestigious engineering award at Offshore Technology Conference (OTC)

Oxford Flow’s ES valve wins prestigious engineering award at Offshore Technology Conference (OTC)

Oxford Flow, flow control equipment specialist for oil, gas, industrial process and water industries, has been awarded the Albert (Al) Woelfel Best Mechanical Engineering Achievement (BMEA) Award by the American Society of Mechanical Engineers (ASME) at OTC (Houston) for its ES axial flow valve.   

The Woelfel BMEA Award recognises a product, device, or system which best reflects innovation or practical use of mechanical engineering in solving problems, improving design or maximising performance. Chosen by an executive committee, Oxford Flow is the first company to win the award since 2019.  

Oxford Flow’s ES axial flow valve, which has been designed with no mechanical actuator, stem or drive train, is proven to eliminate fugitive emissions, significantly increases reliability and is considerably smaller and lighter than existing valves on the market.   

Dr Chris Kennell, Technical Sales Manager at Oxford Flow, was one of a team of engineers who designed and developed the ES valve. Speaking about the award win, Kennell said: “Up until recently, the valve industry has only brought forward iterative engineering design improvements with no major changes to the classic valve blueprint. However, given that the most common failure points of valves are the stem and actuator mechanical linkage, without reimagining the design, operators remain trapped in a cycle of spending millions in maintenance to prevent leaks, causing significant safety risks or impact the environment.  

“The ES valve was designed with the intention of solving an industry problem, creating something that was not only easy to retrofit into existing systems, but that would provide assurance to operators that their operations are now safer and more environmentally sound.”  

The ES valve is certified to ISO 15848-1 Class A and provides notable assurances of leak elimination in comparison to the standard Class B certification, which is typically seen across the industry.  

Scott Houghton, Senior Mechanical Engineer at Oxford Flow, who was also integral in the development of the ES valve, commented: “The world is cracking down on fugitive emissions as one of the largest contributors of industrial emissions of methane, all eyes will be on the oil and gas industry to deliver a significant reduction in emissions, making it imperative that all operators take urgent steps to eliminate fugitive emissions, effectively, reliably, and as soon as possible.  

“Due to its design, operators that begin to replace traditional valves with the reimagined ES valve will no longer need to allocate resources to control fugitive emissions on that portion of their valve population.”  

Neil Poxon, CEO at Oxford Flow, added: “ASME’s recognition of the ES valve through this prestigious award is further verification of the innovation achieved by Dr Chris Kennell, Scott Houghton and everyone else involved in the development and testing of this product. The judges were particularly impressed with the range of technical, environmental and commercial USPs associated with the ES valve and the long term benefits it will offer to the oil and gas industry.” 

Tel No:

01865 595248

Email:

info@oxford-flow.com

Website:

www.oxford-flow.com

LinkedIn:

https://www.linkedin.com/company/oxford-flow/


Published: 11th May 2022

BVAA Strengthens Board with New Members

Rachel Wormald, Managing Director at YPS Valves Ltd and Elizabeth Waterman, ...

Share on Twitter Share on LinkedIn Read full article

BVAA Valve & Actuator Training News

Are you looking for industry-leading, brand independent valve and actuator ...

Share on Twitter Share on LinkedIn Read full article

Comment by BVAA CEO Rob Bartlett

As can be seen from the photograph, clearly the resident birds at Bartlett ...

Share on Twitter Share on LinkedIn Read full article

Howco Group Invests £1 Million in Vertical CNC Turning Centres

Howco Group has unveiled its latest £1million investment, with the ...

Share on Twitter Share on LinkedIn Read full article

Allvalves: Fuelling Growth Through Customer Connectivity

In 2024, Allvalves is poised for an exciting year of growth and expansion, ...

Share on Twitter Share on LinkedIn Read full article

GMM Pfaudler - Introducing the Normag Brand to the BVAA Community

GMM Pfaudler Engineered Plastics & Gaskets are delighted to bring the ...

Share on Twitter Share on LinkedIn Read full article

Building Industry Connections: A GMM Pfaudler Success Story

In the ever-evolving valve industry, GMM Pfaudler stands out for its ...

Share on Twitter Share on LinkedIn Read full article

SAMSON Controls Participates in the UK CCUS and Hydrogen Decarbonisation Summit

SAMSON Controls Ltd – part of the SAMSON group - a renowned leader in ...

Share on Twitter Share on LinkedIn Read full article