Albion encourages customers to be energy wise
The right valve is generally a small fraction of the total system design cost, but delivers significant savings
Albion Valves currently stock around 5000 lines of industrial products
In the building services industry, Albion Valves UK Ltd is encouraging contractors and heating engineers to go back to basics to help avoid spiralling energy costs. Something as simple as a well-balanced commercial heating system can help address energy wastage.
Public buildings such as schools, hospitals and offices, as well as apartment blocks and hotels have complex heating and cooling systems, and therefore can be prone to big energy inefficiencies and ultimately money down the drain.
In a poorly balanced system, problems such as irregular temperature control and inconsistent water circulation can occur, consequently driving up operating costs, creating maintenance issues and wasting energy.
Benefits of a balanced system include; efficient operation of the system, constant desired room temperature and responsible use of resource, as well as lower maintenance costs and less carbon emissions. A well-balanced system ensures energy is distributed to where it is needed, as opposed to some areas becoming overly hot and others too cool.
Commissioning trusted valves is a first step to a wellbalanced system, and with the growing use of dynamic balancing valves, this can be achieved without the need for complex commissioning processes. The cost of commissioning is generally a small fraction of the total system design cost, but delivers significant savings.
Les Littlewood, Albion Sales Director commented:
‘A well-balanced system starts with good design. The designer calculates the mass of water required at each terminal unit, whether heating or cooling. Balancing valves create additional resistance in each branch to direct water in the required proportion to each terminal unit.
Initial design considerations will take into account: the size of space to be conditioned, space usage, occupancy, construction materials and their thermal properties, heat losses and gains and general climatic conditions associated with the building.’
Achieving optimum flow rate is essential, too high a flow rate may cause noise, energy wastage viaoverflow, pumping costs and potentially poor comfort as a result of overheating, whilst too low a flow rate may not dislodge entrapped air.
Flow velocities will generally be in the range 0.75 to 1.15m/s for pipe sizes 1/2˝ to 2˝ and 0.75 to 3m/s for size DN65 to DN300 with pipe pressure drop per meter length generally calculated at 140 to 280 kPa.
Modern, energy efficient heating systems often operate using thermostatically controlled radiator valves TRVs, which are self-regulating and control the water that enters a radiator and ultimately maintains a desired room temperature. TRVs include manual, thermostatic and lockshield valves, with a variety of orientation options.
‘10-30% energy savings are achievable’
Manual radiator valves are common in traditional heating systems and are operated like a tap, whereas lockshield valves are designed to control water flowing out of the radiator and offer a facility to balance radiators across an entire property or heating system.
Where older radiator systems have been replaced or refurbished with TRVs, 10-30% energy savings areachievable, with the higher savings in commercial applications realized with the appropriate design and inclusion of Differential Pressure Control Valves (DPCV).
DPCV and TRV operating together also offer many practical benefits, such as reduced noise, temperature stability with control and improved comfort so reducing issues for both tenants and end users.
Albion Valves currently stock around 5000 lines of industrial products, suitable for applications predominantly within the process, water and HVAC industries, all available from its distributor network.
Albion
Tel: 01226 729900
www.albionvalvesuk.com
Published: 13th May 2014
Rachel Wormald, Managing Director at YPS Valves Ltd and Elizabeth Waterman, ...
Are you looking for industry-leading, brand independent valve and actuator ...
As can be seen from the photograph, clearly the resident birds at Bartlett ...
Howco Group has unveiled its latest £1million investment, with the ...
In 2024, Allvalves is poised for an exciting year of growth and expansion, ...
GMM Pfaudler Engineered Plastics & Gaskets are delighted to bring the ...
In the ever-evolving valve industry, GMM Pfaudler stands out for its ...
SAMSON Controls Ltd – part of the SAMSON group - a renowned leader in ...