Food legislation-compliant seals from Freudenberg for an innovative water-hydraulic process valve

Applications in the process industry pose high requirements to the used components. They have to fulfil the hygienic design standards, be resistant to different process media and comply with global legal requlations. This is also important for sealing solutions. The Danish manufacturer Hydract relies on Freudenberg Sealing Technologies’ development expertise in selecting effective sealing solutions for its new hygienic process valve.

The company based in Holstebro, Denmark, specializes in innovative valve technologies for the liquid processing industry such as brewing. Unlike conventional valves, the company relies on water instead of compressed air to power the valve actuator. Water is non-compressible and thus enables more precise control and improved mixing accuracy. The new hydraulically actuated process valve for a market-leading brewery is also based on this principle.

High requirements of the beverage industry

Specially designed to meet the needs of breweries and other hygienic liquid processing requirements, the patented process valve also requires customized sealing solutions. Quite early in the development process it became clear that standard seals could not meet the high requirements in the beverage industry. The valves used in the process industry must be able to meet high standards in terms of hygienic design specifications, receive industry-specific approvals and offer resistance to CIP/SIP media. The developers therefore turned to the experts at Freudenberg Sealing Technologies. They have already demonstrated their comprehensive know-how in this field with their product line for hygienic plants in the process industry. The joint development work has resulted in three food-approved seals: the Hygienic Pressure Seal made of Quantum® PTFE F18245 and 85 EPDM 302 in two sizes, a hygienic radial seal made of 85 EPDM 302 and a static seal in which two O-rings made of 85 EPDM 302 are combined to form a sealing element. With a tailored hygienic design, all three seals offer high pressure resistance from +5 °C to +140 °C, pressure resistance from 0 to 10 bar and a long service life. The premium quality materials used have received the relevant approvals and were subjected to the conformity tests according to EG (Reg.) 1935/2004, EU (Reg.) 10/2011, FDA and 3-A® Sanitary Standards.

Test bench trials and FEM calculations

This joint development project shows that customized sealing solutions can also be developed in a timely and cost-effective manner: As a basis for further development steps, the team of experts at first tested three of the new hydraulic process valves on Freudenberg’s in-house test bench. This enabled the necessary design adjustments for optimal service life to be identified and minor changes affecting installation and geometry to be implemented directly. The sample seals for the various test bench trials were produced without any need for tools and thus with considerable cost and time benefits. This is made possible by the Freudenberg Xpress® service, which offers machined seals made from original materials and original profiles for prototypes, spare parts or economical small series. Special machining and milling techniques enable individual designs to be realized precisely. In addition, FEM calculations were carried out to obtain meaningful values about the expected service life of the new seals.

High development expertise pays off

Three high-performance sealing solutions that are fully functional over a long service life even under the most demanding test conditions have resulted from the close cooperation with the customer. They offer very good resistance to extreme pressures, meet hygienic design standards and thus have ideal properties for use in the beverage industry. “Thanks to the comprehensive development know-how and materials expertise of Freudenberg Sealing Technologies, we succeeded in obtaining the optimal sealing solutions for our new water-hydraulic process valve in a relatively short period of time,” summarizes Robert Collins, CTO at Hydract A/S. “Currently designed mainly for use in the brewing industry, our valve can also be used in other dairy, food and beverage applications in the future,” adds Mikkel Kornerup, Key Account Manager Global Process Industry at Freudenberg Sealing Technologies.

More information can be found here: https://foodandbeverage.fst.com/en/success-stories/patented-water-hydraulic-process-valve/ 

Tel No:

01332 524 401

Email:

sales.derby@fst.com 

Website:

foodandbeverage.fst.com/en

LinkedIn:

https://www.linkedin.com/company/fst/


Published: 15th September 2022

Hot Spot-IOGP JIP33 S-561 Subsea Wellhead and Tree Equipment Released for Public Comment

What is it? IOGP JIP 33 have now released their revised supplementary ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot ISO 10497:2022 Fire type-testing requirements published

What is it? ISO 10497:2022 Fire type-testing requirements for valves has now ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot Publication of EN 15714-6 Hydraulic Linear Actuators Published

What is it? BS EN 15714-6-2022 Hydraulic Linear Actuators for Industrial ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot UK Government to permit CE Marking for another 2 years

What is it? On 14/11/2022 BEIS and Rt Hon Grant Shapps MP have made the ...

Share on Twitter Share on LinkedIn Read full article

Working together for a cleaner future

Severn Group is the leading valve specialist for critical service and demanding ...

Share on Twitter Share on LinkedIn Read full article

UK Metals Expo 2022

The inaugural UK Metals Expo held on the 14th and 15th September at the NEC ...

Share on Twitter Share on LinkedIn Read full article

Special Print Issue of Valveuser Magazine now out!

Valveuser Magazine Issue 79 is a special bumper issue packed full of member ...

Share on Twitter Share on LinkedIn Read full article

Reflections on BVAA Chairmanship

‘It’s been 5 years since I took on the Chair of the British Valve ...

Share on Twitter Share on LinkedIn Read full article