Fracture Mechanics Finds Safe Cycles for Subsea Flange

Submodel of bolted connection used for fracture mechanics

Submodel of bolted connection used for fracture mechanics

Stress distribution through the bolt used for fracture mechanics

Stress distribution through the bolt used for fracture mechanics


Stress distribution under Hydrostatic test pressure

Stress distribution under Hydrostatic test pressure


Scan the QR code to visit the PDL valves webpages

Scan the QR code to visit the PDL valves webpages


PDL Engineering Group has a wealth of experience in applying advanced engineering software to solve the challenging technical problems of valve and actuator clients. Their analysts are world leaders in High-Pressure, High-Temperature (HPHT) assessments and have developed several in-house postprocessing and calculation tools which improve the efficiency of obtaining results by allowing more thorough assessments whilst reducing timescales and costs.

Recently a client needed multiple complex assessments to be performed on three subsea flange designs which were designed to operate under two different extreme operational conditions. The flanges were to be installed in two oil fields with requirements including pressures and temperatures of up to 20ksi and 400°F.

Starting with an analysis plan, the PDL team summarised the bounding load cases and identified other critical parameters, material properties, the assessment code, software of choice and post-processing requirements. The analysis model contained a flange, mating block, gasket and internal cladding, with modelled studs and nuts.

Half-symmetry FEA models were created, using the ANSYS Parametric Design Language (APDL) for ANSYS Mechanical, to represent the multiple loading scenarios required for the assessment. A Pressure-Bending-Tension (PBT) capacity chart was produced, considering both structural and serviceability limit criteria.

The flange design was then validated in accordance with API 17TR8 and ASME VIII Div. 3 for design conditions. This considered the protection against global plastic collapse, local failure, hydrostatic pressure tests and ratcheting.

Linear Elastic Fracture Mechanics (LEFM) assessments were performed on the components to examine the highly-stressed regions and to predict how a crack would grow (initiation site, direction and growth rate) based on the design code recommendations. For efficiency, the team developed an in-house screening method to quickly identify the critical paths for crack growth using APDL to identify the peak stress locations in each component and performed fracture mechanics (FM) assessments in accordance with API 579-1 / ASME FFS-1 on multiple paths from these points.

The fracture mechanics assessments required the individual threads to be represented, therefore a sub-model was generated with a refined mesh, to accurately capture the stress distribution around the thread root. This stress profile dictated the crack growth rate and direction of propagation.

The meticulous analysis provided confidence in the compliance of the flange designs for through-life operation and significantly reduced both the timescales and costs for the client.

To find out more about the PDL team’s proven track record with clients who rely on them to validate, understand, test and optimise their valves and actuators visit www.pdl-group.com/valves

Tel No:

00 44 1434 609473

Email:

solutions@pdl-group.com

Website:

www.pdl-group.com

LinkedIn: 

https://www.linkedin.com/company/pdl-solutions-europe-ltd/


Published: 22nd February 2023

BVAA Strengthens Board with New Members

Rachel Wormald, Managing Director at YPS Valves Ltd and Elizabeth Waterman, ...

Share on Twitter Share on LinkedIn Read full article

BVAA Valve & Actuator Training News

Are you looking for industry-leading, brand independent valve and actuator ...

Share on Twitter Share on LinkedIn Read full article

Comment by BVAA CEO Rob Bartlett

As can be seen from the photograph, clearly the resident birds at Bartlett ...

Share on Twitter Share on LinkedIn Read full article

Howco Group Invests £1 Million in Vertical CNC Turning Centres

Howco Group has unveiled its latest £1million investment, with the ...

Share on Twitter Share on LinkedIn Read full article

Allvalves: Fuelling Growth Through Customer Connectivity

In 2024, Allvalves is poised for an exciting year of growth and expansion, ...

Share on Twitter Share on LinkedIn Read full article

GMM Pfaudler - Introducing the Normag Brand to the BVAA Community

GMM Pfaudler Engineered Plastics & Gaskets are delighted to bring the ...

Share on Twitter Share on LinkedIn Read full article

Building Industry Connections: A GMM Pfaudler Success Story

In the ever-evolving valve industry, GMM Pfaudler stands out for its ...

Share on Twitter Share on LinkedIn Read full article

SAMSON Controls Participates in the UK CCUS and Hydrogen Decarbonisation Summit

SAMSON Controls Ltd – part of the SAMSON group - a renowned leader in ...

Share on Twitter Share on LinkedIn Read full article