Seetru: Mobile Workshop



Seetru Engineering Services mobile workshops offer customers total on-site valve servicing. Our mobile workshops are fully equipped with all the refurbishment and testing equipment needed to overhaul valves. Mobile workshops can be mobilised at short notice to respond to customers’ refurbishment needs.

No need to send your valves off-site! Sending your valves off-site can be a stressful time for site engineers - adding time and uncertainty to the refurbishment process. Seetru can be bring the facilities to you in the form of our fully equipped Mobile Workshops. In addition, during busy times (eg.shutdowns) we do not require any of your workshop space.

Seetru can refurbish, test and certify your valves directly on the same day you remove them from service and present them back fully certified for return to service within a very short time frame.

In-situ Valve Refurbishment
Do you have welded-in valves? very large valves? or perhaps valves which may take a lot of time, effort and cost to remove? - Simply leave them in-situ and let our ASME certified technicians pre-test, dismantle, inspect, refurbish, rebuild, set, test an certify your valves - all while they remain in position on your system. Set pressures will be certified using our in-situ Tru-Test®, thus providing certified proof of correct setting.

Any Valve, Any Size, Anywhere!
Regardless of size, pressure or location, our experienced engineers will provide solutions tailored to your requirements.
Same Day Certification:
We can test, refurbish and set your valves and provide certification all on the same day
(at your location if required).


Additional Services Include:

-     Surveying and valve management
-     Isolation valve in-situ lapping and polishing

Our Engineering Services continue in full operation. In regard to on-site work, we are, in all cases, working with site clients to operate risk checks and mitigation procedures. Where appropriate, we can operate in isolation entirely from our mobile workshops on-site or close-to site, also we undertake our test and overhaul services in our own workshops and this too may offer a convenient alternative to site visits. Corona Virus (COVID-19) Statement


24/7 Emergency Call Out Our engineers can be contacted 24 hours a day, 7 days a week!
Email: ses@seetru.com
Tel: +44 (0) 117 930 6148 (South)
Tel: +44 (0) 1642 625 900 (North) 


The BVAA Annual Review is out now! It contains a snapshot of the associations ...

Share on Twitter Share on Facebook Read full article

Following the cancellation of the international VALVE WORLD EXPO due to current ...

Share on Twitter Share on Facebook Read full article

Nitronic 50 is an austenitic stainless steel, produced with an increased ...

Share on Twitter Share on Facebook Read full article

DIN EN 1.4462, 1.4410, 1.4501 and 1.4507 are duplex and super duplex stainless ...

Share on Twitter Share on Facebook Read full article

During the early development of stainless steels, nitrogen would have been an ...

Share on Twitter Share on Facebook Read full article

In today’s ever challenging working environment, the pressure is almost ...

Share on Twitter Share on Facebook Read full article

Severn provides management, maintenance and improvement of valves on process ...

Share on Twitter Share on Facebook Read full article

Our high quality courses are now being delivered online via Microsoft TEAMS to ...

Share on Twitter Share on Facebook Read full article