GEMÜ: Dosing Installations for Detergent in Industrial Laundries
Figure 1 - Dosing Cabinet
Figure 2 Multi port valve block with ﬂowmeter for detergent dosing and distribution
Figure 3 Extendable multiport valve block
Extendable GEMÜ Plastic Multi-port Valve Blocks
In a successful industrial laundry applications, the GEMÜ plastic multi-port valve blocks are used to produce a wide variety of detergents and automated systems for dosing these detergents. The compact GEMÜ plastic M-Blocks are the key element in these systems as they make the corresponding dosing, distribution and ﬂushing functions possible.
Operation of detergent dosing installations
Automated detergent dosing installations provide industrial laundries with ﬂexibility, allowing them to adjust the required detergent composition individually to each speciﬁc cleaning programs. Depending on the hardness of the water and the type and level of soiling, the cleaning agents, special additives and care products can be dosed to match the type of textile being washed.
In the case of conventional dosing installation designs, a separate dosing pump is required for each washing machine and medium. The resulting large number of pumps, hoses, unions and distribution components makes extensive maintenance and calibration work necessary.
Compact design improves plant reliability
The use of GEMÜ multi-port valve blocks allows the number of pumps, hoses and ﬁttings to be kept to a minimum on modern dosing installations. Only one pump is required per medium and multiple washing machines can be supplied with one dosing installation. A smaller number of connection points improves plant reliability as it reduces both potential leakage points and deadleg. Less connections mean less time required to assemble the customized units. All these benefits make a significant contribution to cost optimization of the plant.
Multiple functions in one multi-port valve block
In order to achieve a more compact design, all dosing, distribution and ﬂushing functions are combined in one multi-port valve block. The dosing pump for each medium is connected to a variable area ﬂowmeter each of which is connected directly to the multi-port valve block. The valve block consists of 3 rows of pneumatically actuated diaphragm valves. The ﬁrst valve row at the bottom is used to dose the medium. Depending on the requirements, quantities of 10 – 200 ml are metered out. The valves in the second row control which washing machine the medium is sent to and the upper, third row of the valve block is used to ﬂush the unit with water after every dosing process.
Expandability of existing plants
The multi-port valve blocks are also able to be extended. If an industrial laundry adds washing machines to its plant, the existing dosing unit can be extended by the required number of valves with just a few simple modiﬁcations without the need for additional piping, solvent cemented joints or welds.
For more information, click here.
Tel: 01925 824044
Published: 25th October 2021
Each month, the BVAA Principal Technical Consultant, Peter Dix, writes a ...
The BVAA’s large Group Stand will again be proudly representing its 180+ ...
What is it? IOGP JIP33 have released a new specification S-739 Specification ...
This year’s Annual Meetings and Gala Ball is taking place 18 November at ...
Like many, I experienced the most profound sense of loss when the news came ...
Industry is in the starting blocks In about two months it will finally be time ...
Hydrogen Technology Expo Europe - Read full article
Looking for valve solutions for Power-to-X, Power-to-Ammonia and green hydrogen ...