Parker provides design and in-use enhancements to its H Series ISO valve portfolio

H Universal Manifold

H Universal Manifold

Parker Hannifin, the global leader in motion and control technologies, as part of its global focus on factory automation, has added an expanded range of features and capabilities to its H Series ISO valve platform (with flow ranging from Qn 540 to 5900 Nl/mn).

Designed with a new universal manifold, the H Series ISO valves provide the opportunity to mix ISO 02, 01, 1 and 2 valve sizes on one common manifold without transition blocks. This ability allows right sizing in the field and the ISO design supports easy interchangeability for additions or changes to the valve and manifold assembly.

In addition, the H Universal Manifold’s design allows the user to easily zone supply or pilot pressure allowing for a mix of different pressures, the addition of vacuum or the ability to isolate the entire supply pressure or just the pilot pressure.

Zoning and pressure isolation allow the user to quickly disconnect supply pressure for safety reasons and maintenance of the machine.

This zoning flexibility is made possible with a unique design that allows main and pilot supply/exhaust to be added anywhere throughout the valve manifold.

A full range of connectivity options are offered for IO-Link, Ethernet/IP, Profinet IO, EtherCAT, POWERLINK, Modbus/ TCP, DeviceNet, ControlNet, Profibus DP, CANopen, AS-I or InterBus-S. Those customers requiring a collective, hardwired solution can connect with 25 pin D-sub, 19 pin Brad Harrison, 12 pin M23 connections or, for rigid conduit, a terminal box is also offered.

Users can enjoy important benefits from this product due to its robust design, connectivity options, supply pressure zoning, ability to (right size) mix sizes on the manifold and an easy means of controlling flow within the valve.

The H Series ISO valve offers very high flow rates, covers a broad range of industrial applications and is easy to install with the availability of new patented mounting hardware. The overall design reduces complexity at the machine and makes valve assembly or changes simple and easy. Assembly is further supported with a new configurator available at http://ph.parker. com/gb/en/pneumatic-solenoid-valve-h-series-iso.

Tel: +33 (0)6 85 74 82 17
Email: vvancon@parker.com
Web: www.parker.com


Published: 29th April 2019

Oliver Hydcovalves Are Hydrogen Ready

Oliver Hydcovalves manufactures valves for hydrogen and carbon capture ...

Share on Twitter Share on LinkedIn Read full article

BVAA October Training Courses

The BVAA offers a range of quality technical training courses suitable for ...

Share on Twitter Share on LinkedIn Read full article

IOGP JIP33 S-611 Gate Valve Specification Re-Launched for Review

What is it? The IOGP JIP33 specification S-611 for gate valves was first ...

Share on Twitter Share on LinkedIn Read full article

Comment by BVAA CEO Rob Bartlett

On my recent return from a few weeks’ annual leave in France, our ...

Share on Twitter Share on LinkedIn Read full article

Summer Updates with BVAA Members

It’s been a busy summer at the BVAA, and we were fortunate to catch up ...

Share on Twitter Share on LinkedIn Read full article

BVAA – Meet the Trainer

About Paul Reeve Paul Reeve is a Chartered Engineer and a registered ...

Share on Twitter Share on LinkedIn Read full article

BVAA Technical Activity - July 2022

Each month, the BVAA Principal Technical Consultant, Peter Dix, writes a ...

Share on Twitter Share on LinkedIn Read full article

The BVAA prepares for Valve World Expo 2022!

Valve World Expo 2022 takes place between 29 Nov – 1 December and is one ...

Share on Twitter Share on LinkedIn Read full article