Hot Spot - prEN 15714-3 Pneumatic Part Turn Actuators and prEN 15714-6 Hydraulic Linear Actuators- Basic Requirements

What is it?
CEN TC/69 has submitted two draft actuator standards for CEN enquiry.


1. prEN15714-3 Pneumatic Part-turn Actuators for Industrial Valves- Basic Requirements
This document will supersede the existing EN 15714-3:2009 standard covering basic requirements for pneumatic part-turn valve actuators, both double acting and single acting, used for on-off and modulating control duties. It also includes guidelines, recommendations and methods for enclosure and corrosion protection, control and testing.


It does not apply to pneumatic actuators which are integral parts of control valves and to pneumatic actuators designed for permanent immersion in fresh or sea water.


2. prEN15714-6 Hydraulic Linear Actuators for Industrial Valves- Basic Requirements
This new draft standard in the EN 15714 series of actuator standards provides basic requirements for piston type hydraulic linear actuators, both double and single acting, used for on-off and modulating control duties. It includes criteria, methods and guidelines for design, qualification, corrosion protection, control and testing.


It does not apply to hydraulic actuators which are integral parts of control valves.


Why is it Important?
These new standards are likely to be important to actuator and valve manufacturers who supply their own part-turn pneumatic or linear hydraulic actuators for both on / off and control applications.


1. prEN15714-3 Pneumatic Part-turn Actuators for Industrial Valves- Basic Requirements
The main changes proposed to the 2009 edition are the inclusion of additional terms and definitions, improvement of the designation of on-off and modulating duty classification and a new clause on motive energy. Changes have also been made to the basic design requirements and type testing and production control aspects of conformity assessment.


2. prEN15714-6 Hydraulic Linear Actuators for Industrial Valves- Basic Requirements
This new standard specifies standardisation requirements for all aspects of linear hydraulic actuators with a similar scope to other parts of the EN15714 series. It is important that manufacturers of these actuators review the proposed requirements with a view to understanding the implications on their existing products whilst it is in the early stages of drafting.

Supersedes
EN 15714-3 2009 will be superseded by the new edition. EN 15714-6 is the first edition of a new standard.


Continuous Improvement
Did we miss anything?
Hot Spots are intended to alert members and provide a brief overview of new standards, activities or procedures that are being introduced in the industry. If there is key information missing that would be helpful, please let us know so that we can improve our future service.

Please note: this Hotspot is for information purposes and we invite comments from BVAA members only. Please also note that at time of publication ballots may be closed. For more information please contact the Secretariat.

BVAA Members: Did you know we have a hotspot tab on the BVAA website? Head over to www.bvaa.org.uk/login-here.asp and log into the member only area. You then need to select ‘Hotspots’ for the latest list. For information on how to access the member only area of the website please contact enquiry@bvaa.org.uk.


Published: 2nd November 2021

Hot Spot-IOGP JIP33 S-561 Subsea Wellhead and Tree Equipment Released for Public Comment

What is it? IOGP JIP 33 have now released their revised supplementary ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot ISO 10497:2022 Fire type-testing requirements published

What is it? ISO 10497:2022 Fire type-testing requirements for valves has now ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot Publication of EN 15714-6 Hydraulic Linear Actuators Published

What is it? BS EN 15714-6-2022 Hydraulic Linear Actuators for Industrial ...

Share on Twitter Share on LinkedIn Read full article

Hot Spot UK Government to permit CE Marking for another 2 years

What is it? On 14/11/2022 BEIS and Rt Hon Grant Shapps MP have made the ...

Share on Twitter Share on LinkedIn Read full article

Working together for a cleaner future

Severn Group is the leading valve specialist for critical service and demanding ...

Share on Twitter Share on LinkedIn Read full article

UK Metals Expo 2022

The inaugural UK Metals Expo held on the 14th and 15th September at the NEC ...

Share on Twitter Share on LinkedIn Read full article

Special Print Issue of Valveuser Magazine now out!

Valveuser Magazine Issue 79 is a special bumper issue packed full of member ...

Share on Twitter Share on LinkedIn Read full article

Reflections on BVAA Chairmanship

‘It’s been 5 years since I took on the Chair of the British Valve ...

Share on Twitter Share on LinkedIn Read full article