Rotork Valve Actuators at Hub of Automated Flood Alleviation Scheme

New Rotork IQ actuators installed on the flushing penstocks. The level sensor that controls the operation of the actuators via the PLC is situated in the downpipe installed between the back two penstocks. Two of the site’s CCTV installations for remote visual monitoring of the river can also be seen.

New Rotork IQ actuators installed on the flushing penstocks. The level sensor that controls the operation of the actuators via the PLC is situated in the downpipe installed between the back two penstocks. Two of the site’s CCTV installations for remote visual monitoring of the river can also be seen.

An extended scope contract performed by Rotork Site Services has successfully delivered full automation of a flood alleviation scheme protecting the historic town of Cardigan in West Wales.

The project involved replacing actuators from another manufacturer, installing a PLC control cabinet and interfacing with the existing river level sensor and telemetry system.

The flood alleviation scheme on the River Mwldan was constructed 20 years ago by the local authority. It consists of a V notch weir, an over-spill grid into a culvert that travels approximately half a mile through the hillside into the estuary and three flushing penstocks. In 2006 the scheme was adopted by Natural Resources Wales (NRW – formally Environmental Agency Wales). Since then, NRW has installed CCTV and telemetry to enable remote visual monitoring of the site from central control rooms and mobile devices.

During recent periods of intense rainfall the weir has been at the point of over-topping and, to reduce the flood risk, two of the penstocks were opened. As well as proving the vital importance of the penstocks, these events also highlighted the unreliability of the electric actuators originally installed. Poor environmental sealing had enabled moisture to enter electrical enclosures, causing operational failures. As a result, NRW decided to replace the actuators and at the same time introduce full automation of the flood alleviation scheme.

The extended scope contract awarded to Rotork Site Services encompassed all aspects of the task, enabling Rotork to organise the total supply of the work together with project management services. Rotork’s responsibilities included an initial survey, removal of the old actuators and replacement with new, installation of a PLC control cabinet with HMI for local control and indication, interfacing with the level sensor and telemetry system and commissioning of the completed installation. The new Rotork

IQ12 intelligent electric actuators installed are controlled by the PLC, using the signal from the river level sensor and operating in 5% travel increments.

Operation of the site is now fully automated and remotely monitored. If necessary, the automatic system can be overridden and the actuators can be operated remotely via the telemetry system or locally via the HMI panel on the PLC control cabinet.

Mike Haley is the NRW MEICA electrical engineer who has been responsible for automation upgrade project. He comments: “The scheme using Rotork actuators has successfully introduced the level of automation and remote monitoring that we required and restored reliability to the operation of the three penstocks. Rotork actuators have a proven record of reliability at other NRW sites, including an installation which has been operating in an exposed coastal environment for 30 years.”

Tel: +44 (0)1225 733 200
Email: information@rotork.com
Web: www.rotork.com


Published: 13th May 2016

BVAA Strengthens Board with New Members

Rachel Wormald, Managing Director at YPS Valves Ltd and Elizabeth Waterman, ...

Share on Twitter Share on LinkedIn Read full article

BVAA Valve & Actuator Training News

Are you looking for industry-leading, brand independent valve and actuator ...

Share on Twitter Share on LinkedIn Read full article

Comment by BVAA CEO Rob Bartlett

As can be seen from the photograph, clearly the resident birds at Bartlett ...

Share on Twitter Share on LinkedIn Read full article

Howco Group Invests £1 Million in Vertical CNC Turning Centres

Howco Group has unveiled its latest £1million investment, with the ...

Share on Twitter Share on LinkedIn Read full article

Allvalves: Fuelling Growth Through Customer Connectivity

In 2024, Allvalves is poised for an exciting year of growth and expansion, ...

Share on Twitter Share on LinkedIn Read full article

GMM Pfaudler - Introducing the Normag Brand to the BVAA Community

GMM Pfaudler Engineered Plastics & Gaskets are delighted to bring the ...

Share on Twitter Share on LinkedIn Read full article

Building Industry Connections: A GMM Pfaudler Success Story

In the ever-evolving valve industry, GMM Pfaudler stands out for its ...

Share on Twitter Share on LinkedIn Read full article

SAMSON Controls Participates in the UK CCUS and Hydrogen Decarbonisation Summit

SAMSON Controls Ltd – part of the SAMSON group - a renowned leader in ...

Share on Twitter Share on LinkedIn Read full article