Valve Technical Expertise
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 >
Hot Spot ISO/CD 4126-11: By BVAA’s Technical Consultant, Peter Churm
ISO 4126-11 “Safety devices for protection against excessive pressure - Part 11: Performance testing”
ISO/TC 185 launched the CD enquiry on this ...
Valveuser Issue 24
Hot Spot Machinery Directive 2006/42/EC
CEIR and BVAA have given diligent and careful consideration to the interpretation of the requirements of the Machinery directive relative to its ...
Valveuser Issue 28
Hot Spot 2014 CEN/TC69 systematic review
The systematic review of the following standards of CEN/TC 69 is opened:
EN 593:2009+A1:2011 “Industrial valves - Metallic butterfly valves”
EN ...
Valveuser Issue 28
Hot Spot ISO/CD 28921-2: ISO CD 28921-2 Industrial valves – Isolating valves for low-temperature applications – Part 2: Type testing
During its last plenary meeting on 27 September 2013, ISO/TC 153/SC 1 adopted resolution to submit ISO 28921-2 to CD Enquiry – comments required by 6 ...
Valveuser Issue 28
Hot Spot prEN 764-1 “Pressure equipment - Part 1: Vocabulary”
prEN 764-1 “Pressure equipment - Part 1: Vocabulary” is currently under CEN Enquiry ending on 8 January 2014 It has been prepared by Technical ...
Valveuser Issue 28
Hot Spot API 6FA/6FD and API 607 review
API 6FA Specification for Fire Test for Valves
API Spec 6FD Specification for Fire Test for Check Valves
API Std 607 Fire Test for Quarter-turn ...
Valveuser Issue 28
Hot Spot – ATEX Stakeholder Report March 2014
Heads up advance information regarding the proposed possible inclusion of offshore oil and gas production equipment in the ATEX, Pressure Equipment ...
Valveuser Issue 29
Hot Spot prEN 19
Information regarding the enquiry draft prEN 19, “Industrial valves — Marking of metallic valves”
Following some unavoidable delays the above ...
Valveuser Issue 29
Hot Spot ISO 17292
A revision to ISO 17292 – “Metal ball valves for petroleum, petrochemical and allied industries” is being submitted for DIS enquiry. The enquiry ...
Valveuser Issue 29
Hot Spot ATEX directive 2014/.../EU
European Parliament approve the text of the new NLF-aligned ATEX Directive 2014/…/EU
The European Parliament approved the text of the revised ...
Valveuser Issue 29
Hot Spot EN 12334 and EN 14341
The following European Standards are currently under revision within CEN/TC 69/WG 6:
EN 12334:2001, Industrial valves — Cast iron check ...
Valveuser Issue 29
Hot Spot Draft BS EN 16722
Draft BS EN 16722 Industrial valves - End-to-end and centre-to-end dimensions for valves with screwed ends has been issued for Public ...
Valveuser Issue 29
Hot Spot Recast Pressure Equipment Directive 2014/68/EU
The recast PED was published on 27 June 2014 to replace 97/23/EC.
Member States have until 28 February 2015 to implement Article 13 ...
Valveuser Issue 30
BVAA's New Technical Expert Groups (TEGs)
‘BVAA has recently undertaken a radical overhaul of its management of technical work, both inside and outside of the Association,’ writes BVAA’s ...
Valveuser Issue 34
BVAA’s Technical Hot Spot: Industry valves - Steel and cast iron check valves - proposal by France to extend the scope to include copper alloy BS EN 16767:2016
What is it?:
This European Standard specifies the requirements for cast iron or steel check valves, which are forged, cast or fabricated in ...
Valveuser Issue 43
BVAA’s Technical Hot Spot: API 6DSS Subsea Pipeline Valves 3rd Edition
What is it?:
API 6DSS specifies requirements for the design, manufacturing, quality control, assembly, testing, and documentation of ball, check, ...
Valveuser Issue 44
Technical Report
BVAA Technical Service
I was deeply honoured to be asked to take over as Technical Consultant at BVAA, an organisation with which my family have ...
Valveuser Issue 36
TECHNICAL HOTSPOT: PED 2014/68/EU – TIMESCALE FOR INTRODUCTION
If members are asked for compliance to the new PED, they need to be aware of the critical dates. A summary is as follows:
The full new directive ...
Valveuser Issue 33
BVAA’s Technical Hot Spot
INDUSTRIAL VALVES — MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS — PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION ...
Valveuser Issue 39
PROPOSAL TO ESTABLISH A TECHNICAL EXPERT GROUP TO REVIEW BS EN 13397 INDUSTRIAL VALVES-DIAPHRAGM VALVES MADE OF METALLIC MATERIALS
What is it?:
A group of experts with a background of Diaphragm valve manufacture and supply. All European standards are subject to a regular 5 year ...
Valveuser Issue 39
