Valve Technical Expertise
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 >
Hot Spot NWIP Revision of ISO 23632:2021 Design Validation Testing of Valves
What is it?
An ISO new work item proposal to revise ISO 23632:2021 Industrial Valves- Design-validation testing of valves is currently out for ...
Valveuser Issue 97
Hot Spot: ISO/DIS 21011:2021 Cryogenic Vessels-Valves for Cryogenic Service DIS Enquiry
What is it?
The draft revision of ISO 21011:2008 Cryogenic Vessels-Valves for Cryogenic Service has now been issued for DIS enquiry by ISO ...
Valveuser Issue 61
BVAA: Hot Spot - Approval of ISO 23632:2021 Design Validation Testing of Valves
What is it?
ISO 23632:2021 Industrial Valves- Design-validation testing of valves has been unanimously approved for publication by ISO following ...
Valveuser Issue 62
BVAA: Hot Spot - ISO CD 5115 Part-turn Valve Actuation
What is it?
ISO/CD 5115 "Industrial valves - Part-turn valve actuation" has been issued for comment and ballot by ISO TC 153 WG 16 following ...
Valveuser Issue 62
BVAA: Hot Spot - Shape the Future of UK Product Safety - Call for Evidence
What is it?
Now that the UK has left the European Union the Government is calling for input from manufacturers and trade bodies to understand their ...
Valveuser Issue 62
Hot Spot IOGP JIP33 Revise S-730 Flanged Steel PRV Specification
What is it?
IOGP JIP 33 have published a heavily revised edition of S-730J v2 Flanged steel pressure-relief valves (API 526). This overlay ...
Valveuser Issue 104
Hot Spot Proposed revision of ISO 13628-4:2010 Subsea wellhead and tree equipment
What is it?
The BVAA has been informed that there is a proposal to revise ISO 13628-4:2010 Subsea wellhead and tree equipment and members may be ...
Valveuser Issue 96
Hot Spot - BS EN 12516-2:2014+A1:2021 Shell Design Strength - Calculation Method Published
What is it?
An amendment to BS EN 12516-2:2014 the EN design standard covering Shell design strength by calculation has been published and is now ...
Valveuser Issue 70
Hot Spot - IOGP JIP33 S-563 Material Data Sheets for Piping & Valve Components V3 Published
What is it?
The IOGP JIP33 specification S-563 Material Data Sheets for Piping & Valve Components has been revised and published as version 3. ...
Valveuser Issue 70
Hot Spot - IEC 60534-4 2021 Industrial Process Control Valves - Inspection and routine testing - Published
What is it?
IEC has revised part 4 of its series of industrial process control valve standards. IEC 60534-4 2021 covers inspection and routine ...
Valveuser Issue 70
Hot Spot - Proposed New API Subsea Standard Development for Manifold Valves and Actuators
What is it?
As previously publicised in Hot Spot BV002413 IOGP JIP33 have conducted a supplier feedback questionnaire on subsea manifold valves and ...
Valveuser Issue 70
Hot Spot prEN 12516-3 Industrial Valves Shell Design Strength-Experimental Method CEN Enquiry Ballot
What is it?
CEN/TC69 has published the attached revision of PrEN 12516-3 for CEN enquiry ballot. This standard establishes an experimental method of ...
Valveuser Issue 101
BVAA Hot Spot Introduction of 2019/1020 Market Surveillance Directive
What is it?
The European Union is introducing a new directive on Market Surveillance and Compliance of Products (2019/1020) from 16-7-21. This ...
Valveuser Issue 63
BVAA Hot Spot ISO DIS 28921-1 Isolating Valves for Low-temperature Applications- Design Manufacture and Production Testing
What is it?
There has been a draft revision of ISO 28921-1:2017 Isolating valves for low-temperature applications — Part 1: Design, ...
Valveuser Issue 63
BVAA Hot Spot IOGP JIP33 S-611 Gate Valve Specification Launched for Review
What is it?
The IOGP JIP33 specification S-611 for gate valves was first issued in May 2019. It is now undergoing a review process and is available ...
Valveuser Issue 63
BVAA Hot Spot EN1515-4:2021 Selection of Bolting for PED Equipment Published
What is it?
EN 1515-4 2021 has been published and is available to purchase. This standard has been developed by CEN / TC74, shadowed by BSI ...
Valveuser Issue 63
BVAA Hot Spot NWIP Ballot ISO 15848-3 Classification System and Qualification Procedures for Type Testing of Stem Seals for Valves
What is it?
The new work item proposal is to create a new ISO standard ISO 15848-3 Measurement, test and qualification procedures for fugitive ...
Valveuser Issue 63
BVAA Hot Spot EN ISO 22153 2021 Electric Actuators for Industrial Valves - General Requirements Published
What is it?
BS EN ISO 22153 2021 Electric actuators for industrial valves - General requirements (ISO 22153:2020) has been published and is ...
Valveuser Issue 63
DP Flow: Free Technical Webinar - Valve and Actuator Sizing: 10th August 2021 - 10.00am ~ 11.00am
Need to size a control valve and want to know how it will perform across the flow range?
Need to know where the valve will cavitate, and what the ...
Valveuser Issue 64
BVAA Hot Spot ISO DIS 10497 Testing of Valves - Fire Type Testing Requirements
What is it?
This is a proposed revision to one of the core fire test standards that has now reached the draft standard ballot stage. The main ...
Valveuser Issue 64
